Job description of an engineer for the operation of museum equipment. Job description for operating engineer. Job description of an engineer for equipment of dispatch and process control equipment

I. General provisions

1. The operation engineer belongs to the category of specialists
2. For the position:
- an operating engineer is appointed a person who has a higher professional (technical) education without showing work experience or secondary vocational (technical) education and work experience as a category I technician for at least 3 years, or other positions filled by specialists with secondary vocational education, not less than 5 years;
- operation engineer of category II - a person with a higher professional (technical) education and work experience as an operation engineer or other engineering positions filled by specialists with higher professional education for at least 3 years;
- operation engineer of category I - a person who has a higher professional (technical) education and work experience as an operation engineer of category II for at least 3 years.
3. Appointment to the position of operating engineer and dismissal from it are made by order of the director of the enterprise upon the recommendation of _______________.
4. The operating engineer must know:
4.1. Resolutions, instructions, orders, methodological and regulatory materials on the maintenance and repair of equipment.
4.2. Prospects for technical development of the enterprise.
4.3. Organization of repair work and equipment maintenance.
4.4. A unified system of scheduled preventive maintenance and rational operation of process equipment.
4.5. Technical characteristics, design features, purpose and operating modes of the enterprise equipment, rules for its technical operation.
4.6. Methods for planning repair work.
4.7. The main processes of production of the enterprise's products.
4.8. Advanced repair systems and repair technology.
4.9. The procedure for drawing up estimates for repairs, requests for equipment, materials, spare parts, tools, etc.
4.10. Fundamentals of economics, organization of production, labor and management.
4.11. Fundamentals of labor legislation.
4.12. Labor protection rules and regulations.

5. The operation engineer reports directly to ____________ (the head of the relevant structural unit; other official)
6. During the absence of the operating engineer (illness, vacation, business trip, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

II. Job Responsibilities of an Operations Engineer

Operations engineer:

1. Develops long-term and current plans (schedules) for various types of repairs of equipment and other fixed assets of the enterprise (buildings, water supply systems, sewerage systems, air ducts, etc.), as well as measures to improve their operation and maintenance, monitors the implementation of approved plans (graphs).
2. Promotes the introduction of comprehensive regulated maintenance systems that ensure timely adjustment and repair of equipment, efficient operation of the enterprise, progressive repair technology, highly efficient repair devices, and mechanization of labor-intensive processes.
3. Participates in checking the technical condition of equipment, the quality of repair work, as well as in the acceptance of equipment newly received by the enterprise, and, if necessary, draws up documentation for its decommissioning or transfer to other enterprises.
4. Organizes the preparation of repair work, determines the need for spare parts for equipment repair, to provide them to the enterprise on the terms of cooperation.
5. Exercises control over the activities of the enterprise departments involved in carrying out repair work and testing of equipment, over compliance with the rules of operation, maintenance and supervision of it.
6. Develops measures aimed at improving the organization of maintenance and repair of equipment, reducing the labor intensity and cost of repair work, improving their quality, increasing the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).
7. Participates in planning the technical development of production, major repairs and modernization of fixed assets, drawing up a balance of production capacities and their use.
8. Develops regulatory materials for preventive maintenance and repair of equipment (standards for repair and operating costs, service life of spare parts, range of replaceable and wearing parts, norms and limits for lubricant consumption).
9. Analyzes the causes of increased wear, accidents and equipment downtime and participates in the investigation of their causes, as well as the causes of industrial injuries, and takes measures to prevent it.
10. Monitors compliance with established deadlines for drawing up lists of defects and requests for repairs.
11. Draws up requests and specifications for spare parts, materials, tools, monitors the correct use of them.
12. Prepares materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed (industrial-production and non-industrial) assets, exercises control over the expenditure of funds for these purposes.
13. Participates in work related to the development and implementation of standards and technical specifications for the operation, maintenance and repair of equipment.
14. Gives opinions on rationalization proposals and inventions, on improving the design of equipment, organizing repair work and maintenance of equipment, provides practical assistance to innovators and inventors and organizes the implementation of accepted proposals.
15. Summarizes and disseminates best practices in organizing the repair and operation of equipment.
16. Keeps records and certification of equipment, buildings and other fixed assets of the enterprise, makes changes to the passports after their repair, modernization and reconstruction, draws up the necessary technical documentation and maintains established reporting.
17. Performs individual official assignments of his immediate superior.

III. Operating engineer rights

The operating engineer has the right:

1. Get acquainted with the draft decisions of the enterprise management concerning its activities.
2. Submit proposals for improvement of work related to the responsibilities provided for in this job description for management’s consideration.
3. Inform your immediate supervisor about all shortcomings in the production activities of the enterprise (its structural divisions) identified during the performance of your official duties and make proposals for their elimination.
4. Request personally or on behalf of the immediate supervisor from the heads of departments of the enterprise and specialists for information and documents necessary to fulfill his official duties.
5. Involve specialists from all (individual) structural units in solving the tasks assigned to it (if this is provided for by the regulations on structural units, if not, then with the permission of management).
6. Demand that the management of the enterprise provide assistance in the performance of its official duties and rights.

IV. Responsibilities of the Operations Engineer

The operating engineer is responsible for:

1. For improper performance or failure to fulfill one’s job duties as provided for in this job description - within the limits determined by the current labor legislation of the Russian Federation.
2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

The job description of an operating engineer has been developed in accordance with ________________________.

Download job description
equipment supply engineer(.doc, 90KB)

I. General provisions

An equipment installation engineer is classified as a specialist.
For the position:
- An equipment installation engineer is appointed by a person who has a higher professional (technical or engineering-economic) education without presenting requirements for work experience or a secondary vocational (technical or engineering-economic) education and work experience as a category I technician for at least 3 years or in other positions. positions filled by specialists with secondary vocational (technical or engineering-economic) education for at least 5 years;
- Category II equipment installation engineer - a person who has a higher professional (technical or engineering-economic) education and work experience as an equipment installation engineer or in other engineering positions, replaced by specialists with a higher professional (technical or engineering-economic) degree. education, at least 3 years.
- Category I procurement engineer - a person who has a higher professional (technical or engineering-economic) education and work experience as an equipment procurement engineer of category II for at least 3 years;
Appointment to the position of equipment procurement engineer and dismissal from it are made by order of the director of the enterprise upon the recommendation of the head of the equipment procurement department.
The equipment installation engineer must know:
1. 4.1. Resolutions, instructions, orders of higher authorities, methodological and regulatory materials on logistics.
2. 4.2. Prospects for technical development of the enterprise.
3. 4.3. Organization of logistics of the enterprise.
4. 4.4. The range of equipment and components required by the enterprise.
5. 4.5. Technical characteristics, design features of equipment, components.
6. 4.6. The procedure for justifying needs and drawing up requests for equipment and components, concluding agreements with suppliers.
7. 4.7. Basics of production technology.
8. 4.8. Fundamentals of economics, organization of production, labor and management.
9. 4.9. Fundamentals of labor legislation.
10. 4.10. Rules and regulations of occupational health, safety, industrial sanitation and fire protection.
The equipment procurement engineer reports directly to the head of the equipment procurement department.
During the absence of an equipment installation engineer (illness, vacation, business trip, etc.), his duties are performed by a person appointed by order in the prescribed manner. This person acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

II. Job responsibilities

Equipment installation engineer:

Performs work to provide equipment and components for capital construction and repair and maintenance needs of the enterprise.
Checks the correctness of determination of the needs for equipment and components in the applications of the enterprise departments and, on their basis, and also, in accordance with the title lists and project documentation, prepares consolidated applications with the necessary calculations and justifications.
Develops equipment supply schedules based on the approved completion dates for construction and installation work.
Prepares draft contracts with suppliers, orders for the production of non-standardized equipment, materials for coordination, together with design organizations, of technical conditions for their implementation.
Monitors the implementation of logistics plans for the enterprise, compliance by suppliers with established delivery schedules, quality and completeness of equipment.
Draws up reports, conducts correspondence on claims in case of violation of contractual obligations by suppliers, coordinates changes in delivery dates, replacement of equipment and components.
Monitors the correctness of quantitative and qualitative acceptance of equipment and components, their storage, conservation, timely transfer to construction and installation organizations and departments of the enterprise.
Carries out work to identify excess stocks of equipment and components, uninstalled and unused equipment, and prepares proposals for its implementation.
Prepares the data necessary for reporting on the implementation of the enterprise's logistics plan.
Performs individual official assignments from his immediate superior.

III. Rights

The equipment installation engineer has the right to:

Get acquainted with the draft decisions of the enterprise management concerning its activities.
Submit proposals for improvement of work related to the responsibilities provided for in this job description for consideration by management.
Inform your immediate supervisor about all shortcomings in the production activities of the enterprise (its structural divisions) identified during the performance of your official duties and make proposals for their elimination.
Request personally or on behalf of the immediate supervisor from heads of departments of the enterprise and specialists information and documents necessary to perform his job duties.
Involve specialists from all (individual) structural units in solving the tasks assigned to it (if this is provided for by the regulations on structural units, if not, then with the permission of management).
Demand that the management of the enterprise provide assistance in the performance of its official duties and rights.

IV. Responsibility

The equipment installation engineer is responsible for:

For improper performance or failure to fulfill one’s job duties as provided for in this job description - within the limits determined by the current labor legislation of the Russian Federation.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

I. General provisions

1. An equipment installation engineer is classified as a specialist.

2. For the position:

An equipment installation engineer is appointed by a person who has a higher professional (technical or engineering-economic) education without presenting requirements for work experience or a secondary vocational (technical or engineering-economic) education and work experience as a category I technician for at least 3 years or in other positions. positions filled by specialists with secondary vocational (technical or engineering-economic) education for at least 5 years;

Category II equipment installation engineer - a person who has a higher professional (technical or engineering-economic) education and work experience as an equipment installation engineer or in other engineering positions, replaced by specialists with a higher professional (technical or engineering-economic) degree. education, at least 3 years.

Category I procurement engineer - a person who has a higher professional (technical or engineering-economic) education and work experience as an equipment procurement engineer of category II for at least 3 years;

3. Appointment to the position of equipment procurement engineer and dismissal from it are made by order of the director of the enterprise upon the recommendation of the head of the equipment procurement department.

4. The equipment installation engineer must know:

4.1. Resolutions, instructions, orders of higher authorities, methodological and regulatory materials on logistics.

4.2. Prospects for technical development of the enterprise.

4.3. Organization of logistics of the enterprise.

4.4. The range of equipment and components required by the enterprise.

4.5. Technical characteristics, design features of equipment, components.

4.6. The procedure for justifying needs and drawing up requests for equipment and components, concluding agreements with suppliers.

4.7. Basics of production technology.

4.8. Fundamentals of economics, organization of production, labor and management.

4.9. Fundamentals of labor legislation.

4.10. Rules and regulations of occupational health, safety, industrial sanitation and fire protection.

5. The equipment procurement engineer reports directly to the head of the equipment procurement department.

6. During the absence of the equipment installation engineer (illness, vacation, business trip, etc.), his duties are performed by a person appointed by order in the prescribed manner. This person acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

II. Job responsibilities

Equipment installation engineer:

1. Performs work to provide equipment and components for capital construction and repair and maintenance needs of the enterprise.

2. Checks the correctness of determination of the needs for equipment and components in the applications of the enterprise departments and, on their basis, and also, in accordance with the title lists and project documentation, prepares consolidated applications with the necessary calculations and justifications.

3. Develops equipment supply schedules based on the approved completion dates for construction and installation work.

4. Prepares draft contracts with suppliers, orders for the production of non-standardized equipment, materials for coordination, together with design organizations, of technical conditions for their implementation.

5. Monitors the implementation of logistics plans for the enterprise, compliance by suppliers with established delivery schedules, quality and completeness of equipment.

6. Draws up reports, conducts correspondence on claims in case of violation of contractual obligations by suppliers, coordinates changes in delivery dates, replacement of equipment and components.

7. Controls the correctness of quantitative and qualitative acceptance of equipment and components, their storage, conservation, timely transfer to construction and installation organizations and departments of the enterprise.

8. Carries out work to identify excess stocks of equipment and components, uninstalled and unused equipment, and prepares proposals for its implementation.

9. Prepares the data necessary for reporting on the implementation of the enterprise’s logistics plan.

10. Performs individual official assignments of his immediate superior.

III. Rights

The equipment installation engineer has the right to:

1. Get acquainted with the draft decisions of the enterprise management concerning its activities.

2. Submit proposals for improvement of work related to the responsibilities provided for in this job description for management’s consideration.

3. Inform your immediate supervisor about all shortcomings in the production activities of the enterprise (its structural divisions) identified during the performance of your official duties and make proposals for their elimination.

4. Request personally or on behalf of the immediate supervisor from the heads of departments of the enterprise and specialists for information and documents necessary to fulfill his official duties.

5. Involve specialists from all (individual) structural units in solving the tasks assigned to it (if this is provided for by the regulations on structural units, if not, then with the permission of management).

6. Demand that the management of the enterprise provide assistance in the performance of its official duties and rights.

IV. Responsibility

The equipment installation engineer is responsible for:

1. For improper performance or failure to fulfill one’s job duties provided for in this job description - within the limits determined by the current labor legislation of the Russian Federation.

2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

We bring to your attention a typical example of a job description for an equipment installation engineer, sample 2019. should include the following sections: general regulations, job responsibilities of the equipment procurement engineer, rights of the equipment procurement engineer, responsibility of the equipment procurement engineer.

Job Description for Equipment Procurement Engineer belongs to the section " Industry-wide qualification characteristics of positions of workers employed in enterprises, institutions and organizations".

The job description of an equipment installation engineer should reflect the following points:

Responsibilities of equipment engineer

1) Job responsibilities. Performs work to provide equipment and components for capital construction and repair and maintenance needs of the enterprise. Checks the correctness of the determination of the need for equipment and components in the applications of the enterprise departments and, on their basis, and also, in accordance with the title lists and project documentation, prepares consolidated applications with the necessary calculations and justifications. Develops equipment supply schedules based on the approved completion dates for construction and installation work. Prepares draft contracts with suppliers, orders for the production of non-standardized equipment, materials for coordination, together with design organizations, of technical conditions for their implementation. Monitors the implementation of logistics and technical support plans for the enterprise, compliance by suppliers with established delivery schedules, quality and completeness of equipment. Draws up reports, conducts correspondence on claims in case of violation of contractual obligations by suppliers, coordinates changes in delivery dates, replacement of equipment and components. Monitors the correctness of quantitative and qualitative acceptance of equipment and components, their storage, conservation, timely transfer to construction and installation organizations and departments of the enterprise. Carries out work to identify excess stocks of equipment and components, uninstalled and unused equipment, and makes proposals for its implementation. Prepares the data necessary for reporting on the implementation of the logistics plan for the enterprise.

The equipment installation engineer must know

2) When performing his job duties, an equipment installation engineer must know: resolutions, instructions, orders, methodological and regulatory materials on material and technical supplies; prospects for technical development of the enterprise; organization of logistics and technical support for the enterprise; the range of equipment and components required by the enterprise; technical characteristics, design features of equipment, components; the procedure for justifying needs and drawing up applications for equipment and components, concluding agreements with suppliers; basics of production technology; fundamentals of economics, organization of production, labor and management; basics of labor legislation; rules and regulations of labor protection.

Requirements for the qualifications of an equipment installation engineer

3) Qualification requirements.

Category I equipment installation engineer: higher professional (technical or engineering-economic) education and work experience as an equipment installation engineer of category II for at least 3 years.

Category II equipment installation engineer: higher professional (technical or engineering - economic) education and work experience as an equipment installation engineer or other engineering positions filled by specialists with higher professional (technical or engineering - economic) education, at least 3 years.

Equipment installation engineer: higher professional (technical or engineering - economic) education without requirements for work experience or secondary vocational (technical or engineering - economic) education and work experience as a category I technician for at least 3 years or other positions filled by specialists with secondary vocational (technical or engineering-economic) education, at least 5 years.

1. General Provisions

1. An equipment installation engineer is classified as a specialist.

2. A person who has a higher professional (technical or engineering-economic) education without requirements for work experience or a secondary vocational (technical or engineering-economic) education and work experience as a category I technician for at least 3 years is accepted as an equipment installation engineer or other positions filled by specialists with secondary vocational (technical or engineering-economic) education, at least 5 years.

3. Equipment installation engineer is hired and dismissed ______ (director, manager) organization on behalf of _______ (position).

4. The equipment installation engineer must know:

resolutions, instructions, orders, methodological and regulatory materials on logistics;
prospects for technical development of the enterprise;
organization of logistics of the enterprise;
the range of equipment and components required by the enterprise;
technical characteristics, design features of equipment, components;
the procedure for justifying needs and drawing up applications for equipment and components, concluding agreements with suppliers;
basics of production technology;
fundamentals of economics, organization of production, labor and management;
basics of labor legislation;
rules and regulations of labor protection.

5. In his activities, the equipment installation engineer is guided by:

legislation of the Russian Federation,
Charter (regulations) of the organization,
orders and instructions ______ (CEO, director, manager) organizations,
this job description,
Internal labor regulations of the organization.

6. Equipment installation engineer reports directly to: _____ (position)

7. During the absence of an equipment installation engineer (business trip, vacation, illness, etc.), his duties are performed by a person appointed ______ (position) of the organization in the prescribed manner, who acquires the corresponding rights, duties and is responsible for the performance of the duties assigned to him.

2. Job responsibilities of equipment procurement engineer

Equipment installation engineer:

1. Performs work to provide equipment and components for capital construction and repair and maintenance needs of the enterprise.

2. Checks the correctness of determination in the applications of the enterprise departments of the need for equipment and components and, on their basis, and also, in accordance with the title lists and project documentation, prepares consolidated applications with the necessary calculations and justifications.

3. Develops equipment supply schedules based on the approved completion dates for construction and installation work.

5. Monitors the implementation of logistics plans for the enterprise, compliance by suppliers with established delivery schedules, quality and completeness of equipment.

6. Draws up reports, conducts correspondence on claims in case of violation of contractual obligations by suppliers, coordinates changes in delivery dates, replacement of equipment and components.

8. Conducts work to identify excess stocks of equipment and components, uninstalled and unused equipment, and makes proposals for its implementation.

9. Prepares the data necessary for reporting on the implementation of the enterprise’s logistics plan.

3. Rights of the equipment installation engineer

The equipment installation engineer has the right to:

1. Submit proposals for management’s consideration:

to improve work related to the responsibilities provided for in this instruction,
on the encouragement of distinguished employees subordinate to him,
on bringing to material and disciplinary liability workers who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his job duties.

3. Get acquainted with the documents defining his rights and responsibilities for his position, criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization’s management relating to its activities.

5. Require the management of the organization to provide assistance, including ensuring organizational and technical conditions and execution of the established documents necessary for the performance of official duties.

6. Other rights established by current labor legislation.

4. Responsibility of the equipment engineer

The equipment installation engineer is responsible in the following cases:

1. For improper performance or failure to fulfill one’s job duties provided for in this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.

Job description for equipment installation engineer - sample 2019. Job responsibilities of an equipment procurement engineer, rights of an equipment procurement engineer, responsibility of an equipment procurement engineer.

Typical sample

I approve

___________________________________ (Last name, initials)
(name of company, _________________________
enterprises, etc., him (director or other
organizational and legal form) official,
authorized to approve
job description)

" " ____________ 20__

Job description
engineer (specialist, expert)
for repairs*
______________________________________________
(name of organization, enterprise, etc.)

" " ____________ 20__ N__________

This job description was developed and approved by
based on an employment contract with __________________________________________
(name of the position of the person for whom
______________________________________________________________ and in accordance with
this job description has been compiled)
provisions of the Labor Code of the Russian Federation and other regulatory
acts regulating labor relations in the Russian Federation.

I. General provisions

1.1. A repair engineer is a specialist
is hired and dismissed by order of the director of the enterprise
according to the submission of ________________________________________________________________.
1.2. The repair engineer reports directly to ________________
(to the head
________________________________________________________________________.
relevant structural unit, other official)
1.3. During the absence of a repair engineer (business trip, vacation,
illness, etc.) his official duties are performed by a deputy,
appointed in accordance with the established procedure, who bears full responsibility
for their high-quality and timely implementation.
1.4. A person is appointed to the position of repair engineer of category I,
having a higher professional (technical) education and work experience in
positions of category II repair engineer for at least _______ years; on
position of repair engineer II category - a person with a higher
professional (technical) education and work experience in the position
repair engineer or other engineering positions,
replaced by specialists with higher professional education, no less
________ years; for the position of repair engineer - a person with a higher
vocational (technical) education, without requirements for
work experience, or secondary vocational (technical) education and
work experience as a category I technician for at least ________ years or
other positions filled by specialists with secondary professional
education, at least _________ years.
1.5. In his activities, the repair engineer is guided by:
- legislative and regulatory acts on issues of implementation
work;
- methodological materials relating to relevant issues;
- the charter of the enterprise;
- labor regulations;
- orders and instructions of the director of the enterprise
(direct manager);
- this job description.
1.6. The repair engineer must know:
- resolutions, instructions, orders, methodological and normative
materials for equipment maintenance and repair,
prospects for technical development of the enterprise;
- organization of repair work and maintenance
equipment;
- A unified system of preventive maintenance and rational
operation of technological equipment;
- technical characteristics, design features, purpose
and operating modes of the enterprise equipment, the rules of its technical
operation;
- methods of planning repair work;
- basic technological processes of product production
enterprises;
- advanced repair systems and repair technology;
- the procedure for drawing up estimates for repairs, applications for
equipment, materials, spare parts, tools, etc.;
- basics of economics, organization of production, labor and management;
- basics of labor legislation, rules and regulations of labor protection.

II. Functions

The repair engineer is responsible for the following functions:
2.1. Organization of repair of equipment and other fixed assets
enterprises.
2.2. Interaction with representatives of third party organizations
relevant questions.
2.3. Generalization and dissemination of best practices of the organization
repair and operation of equipment, provision of practical assistance
innovators and inventors.
2.4. Development of regulatory materials, preparation of technical
documentation.
2.5. Ensuring compliance with operating rules, technical
equipment maintenance and supervision.
2.6. Submission of established reports.
2.7. ______________________________________________________________.

III. Job responsibilities

To perform the functions assigned to him, a repair engineer
must:
3.1. Develop long-term and current plans
(schedules) of various types of repairs of equipment and other fixed assets
enterprises (buildings, water supply systems, sewerage systems, air ducts and
etc.), as well as measures to improve their operation and maintenance,
control the implementation of approved plans (schedules).
3.2. Promote the implementation of integrated service systems,
ensuring timely adjustment and repair of equipment, effective
work of the enterprise, progressive repair technology, highly efficient
repair devices, mechanization of labor-intensive processes.
3.3. Take part in checking the technical condition
equipment, quality of repair work, as well as in acceptance again
equipment arriving at the enterprise, if necessary, formalize
documentation for the write-off of equipment that has become unusable or
transferring it to other enterprises.
3.4. Organize the preparation of repair work, determine
the need for spare parts for equipment repair.
3.5. Monitor the activities of departments
enterprises involved in repair work and testing
equipment, compliance with operating rules, technical
maintenance and supervision.
3.6. Develop measures to improve the organization
maintenance and repair of equipment, to reduce labor intensity and cost
repair work, improving their quality, increasing efficiency
use of fixed assets (increasing wear resistance and reducing
equipment downtime).
3.7. Participate in technical development planning work
production, overhaul and modernization of fixed assets,
drawing up a balance of production capacities and their use.
3.8. Develop regulatory materials on preventive
maintenance and repair of equipment (standards for repair and maintenance
costs, service life of spare parts, range of replacement and
wear parts, norms and limits of lubricant consumption
materials).
3.9. Analyze the causes of increased wear, accidents and downtime
equipment and participate in the investigation of their causes, as well as the causes
occupational injuries, take measures to prevent them.
3.10. Monitor compliance with established deadlines
compiling lists of defects and requests for repairs.
3.11. Prepare requests and specifications for spare parts, materials,
tools, control their correct use.
3.12. Prepare materials for concluding contracts with
manufacturing enterprises for the supply of spare parts and equipment,
as well as with specialized contractors for capital
repair of fixed assets (industrial-production and non-industrial) assets,
exercise control over the expenditure of funds for these purposes.
3.13. Take part in work related to the development and
implementation of standards and technical specifications for operation, maintenance and
equipment repair.
3.14. Give opinions on rationalization proposals and
inventions, on improving the design of equipment,
organizing repair work and equipment maintenance,
provide practical assistance to innovators and inventors and
organize the implementation of accepted proposals.
3.15. Summarize and disseminate best practices in organizing repairs and
equipment operation.
3.16. Keep records and certification of equipment, buildings, structures and
other fixed assets of the enterprise, make changes to the passports after they are
repair, modernization and reconstruction, draw up the necessary technical
documentation and maintain established reporting.
3.17. _____________________________________________________________.

IV. Rights

The repair engineer has the right:
4.1. Get acquainted with the draft decisions of the enterprise management,
relating to his activities.
4.2. Submit proposals for management's consideration
improvement of work related to the responsibilities provided for
this instruction.
4.3. Receive from heads of structural divisions,
specialists information and documents on issues included in its
competence.
4.4. Involve specialists from all structural divisions
enterprise to resolve the responsibilities assigned to it (if this
provided for by the provisions on structural divisions, if not - with
permission from the head of the enterprise).
4.5. Require the management of the enterprise to provide assistance in
performance of their official duties and rights.

V. Responsibility

The repair engineer is responsible for:
5.1. For failure to perform (improper performance) of their duties
duties provided for in this job description, in
within the limits determined by the labor legislation of the Russian Federation.
5.2. For those committed in the course of carrying out their activities
offenses - within the limits determined by administrative, criminal and
civil legislation of the Russian Federation.
5.3. For causing material damage - within the limits specified
labor, criminal and civil legislation of the Russian Federation.

The job description was developed in accordance with ________________
(Name,
_____________________________.
document number and date)

Head of structural unit (initials, surname)
_________________________
(signature)

" " _____________ 20__

AGREED:

Head of the legal department

(initials, surname)
_____________________________
(signature)

" " ________________ 20__

I have read the instructions: (initials, surname)
_________________________
(signature)

" " _____________ 20__